LS จำหน่ายลวดเชื่อม
ตู้เชื่อม เครื่องเชื่อม
หุ่นยนต์อุตสาหกรรม อุปกรณ์เชื่อมทุกชนิด

Call Centerร่วมงานกับเรา
ค้นหาสินค้า อุปกรณ์เครื่องเชื่อม ลวดเชื่อม

Online store Welding Machine

ตู้เชื่อม / เครื่องเชื่อม

Dynasty® 200 Series

Maximum flexibility - Miller Electric combines advanced inverter technology with Auto-Line™ technology, offering the most flexible AC/DC TIG/Stick power supply in the welding industry.

Miller Dynasty® 200 Series Product Literature (PDF)

Miller Dynasty® 200 Series

Dynasty® 200 Series

Dynasty 200 DX Wireless Remote Foot Control Complete
  • Dynasty 200 DX power source
  • Quick Reference Guide:
    English | Spanish
  • 8 ft (2.4 m) primary cord
  • (2) Dinse 50 mm connectors
  • 2-Wheel Trolley Cart
  • Coolmate™ 1 Cooler 120VAC
  • Coolant (1 gallon)
  • Wireless Remote Foot Control
  • 25 ft (7.6 m) Weldcraft® WP20
       water-cooled torch
  • Torch accessory kit with tungsten
    •    Shielding Cups
    •    Collets-1/16, 3/32, 1/8
    •    Collet Bodies-1/16, 3/32, 1/8
    •    2% Cerium Tungsten-1/16, 3/32, 1/8
  • 15 ft (4.6 m) work lead w/clamp
  • Gas hose
  • Smith Regulator/flowmeter
  • Torch Cable Cover
  • Welding Capability
    Not to scale

    Aluminum Min.
    0.020" (0.5 mm)
    Steel Min.
    0.004" (0.1 mm)

    Aluminum Max.
    1/4" (6.4 mm)
    Steel Max.
    1/4" (6.4 mm)
    Blue Lightning™ - High Frequency Arc Starter for TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.

    Compatible with Wireless Remote Controls. Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.

    AC TIG Features

    Extended AC Balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.

    AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.

    AC Waveforms

    Advance Squarewave, fast freezing puddle, deep penetration, and fast travel speeds.

    Soft Squarewave for a soft buttery arc with maximum puddle control and good wetting action.

    Sine wave for customers that like a traditional arc. Quiet with good wetting.

    Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds.

    DC TIG Features

    Exceptionally smooth and precise arc for welding exotic materials.
    Built-in pulser reduces heat input; adds arc stability (DX model only).

    Stick Features (AC/DC)

    Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.

    Hot Start™ adaptive control provides positive arc starts without sticking.

    AC frequency control adds additional stability when Stick welding in AC for smoother welds.

    Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.


  • TIG (GTAW)
  • Pulsed TIG (GTAW-P) with DX model only
  • Stick (SMAW)
  • Applications

    Industrial to Heavy Industrial Apps
  • Petro/Chem Fabrication
  • Aerospace
  • Food/Beverage Industry
  • Mechanical Contractors
  • Shipboard Installation/Repair
  • Dairy Industry
  • Specifications

    Input Power
  • 3- or 1-Phase Power

  • TIG Rated Output
  • 200 A at 18 V, 20% Duty Cycle
  • 150 A at 16 V, 60% Duty Cycle
  • 140 A at 15.6 V, 40% Duty Cycle
  • 100 A at 14 V, 100% Duty Cycle

  • Stick Rated Output
  • 200 A at 28 V, 20% Duty Cycle
  • 130 A at 25.2 V, 60% Duty Cycle
  • 100 A at 24 V, 60% Duty Cycle
  • 90 A at 23.6 V, 100% Duty Cycle

  • Welding Amperage Range
  • 1-200 Amps (1-150 on 120 VAC)

  • Net Weight
  • 45 lb (20.5 kg)

  • Miller recommends Maxal
    aluminum electrodes

    Models Available

  • SD - Provides the basic features that are     required for most AC/DC TIG or Stick welding
  • DX - When the job demands greater control
        the DX provides pulse on/off, pulse frequency,
        peak % time, background amperage, initial
        amperage, initial slope time, final slope time
        and final amperage control.

  • Welding Machine