LS จำหน่ายลวดเชื่อม
ตู้เชื่อม เครื่องเชื่อม
หุ่นยนต์อุตสาหกรรม อุปกรณ์เชื่อมทุกชนิด


Call Centerร่วมงานกับเรา
ค้นหาสินค้า อุปกรณ์เครื่องเชื่อม ลวดเชื่อม

Online store Welding Machine

ตู้เชื่อม / เครื่องเชื่อม

Maxstar® 200 Series

Industry standard - Miller Electric pioneered the Maxstar-type market, now we've perfected it. Maxstar 200 Series provides a solution for every user's needs; from simple to fully automated.

Miller Maxstar® 200 Series Product Literature (PDF)

Miller Maxstar® 200 Series

Maxstar® 200 Series
WELDING MACHINE TIG (GTAW)

Maxstar 200 DX Wireless Remote Foot Control Complete
  • Maxstar 200 DX power source
  • 8 ft (2.4 m) primary cord
  • (2) Dinse 50 mm connectors
  • 2-Wheel Trolley Cart
  • Coolmate™ 1 Cooler 120VAC
  • Coolant (1 gallon)
  • Wireless Remote Foot Control
  • 25 ft (7.6 m) Weldcraft® WP20 water-cooled torch
  • Torch accessory kit with tungsten
  • Shielding Cups
    • Collets-1/16, 3/32, 1/8
    • Collet Bodies-1/16, 3/32, 1/8
  • 2% Cerium Tungsten-1/16, 3/32, 1/8
  • 15 ft (4.6 m) work lead w/clamp
    • Gas hose
  • Smith Regulator/flowmeter
  • Torch Cable Cover
  • Welding Capability
    Not to scale

    Steel Min.
    0.004" (0.1 mm)

    Steel Max.
    1/4" (6.4 mm)
    Blue Lightning™ - High Frequency Arc Starter for TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.

    Compatible with Wireless Remote Controls. Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
    DC TIG Features
    Exceptionally smooth and precise arc for welding exotic materials.

    Built-in pulser reduces heat input; adds arc stability (DX and LX models only).
    Stick Features
    Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.

    Hot Start™ adaptive control provides positive arc starts without sticking.

    Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.


    Process

  • TIG (GTAW)
  • Pulsed TIG (GTAW-P) with DX and LX models
  • Stick (SMAW)
  • Applications

    Manufacturing Industrial
  • Aerospace
  • Petro/Chem Fabrication
  • Mechanical Contractors
  • Food/Beverage Industry
  • Dairy Industry
  • Shipboard Installation/Repair
  • Specifications

    Input Power
  • Requires 3- or 1-Phase Power

  • Rated Output
  • TIG: 175 A at 17 V, 60% Duty Cycle
        (1 or 3-Phase)
  • Stick: 150 A at 26 V, 60% Duty Cycle
        (1 or 3-Phase)

  • Welding Amperage Range
  • 1 - 200 Amps

  • Net Weight
  • 37 lb (16.8 kg)

  • Models Available

  • SD Model: Provides the basic features that are    required for most TIG or Stick welding    applications.
  • DX Model: When the job demands greater    control the DX provides pulse on/off, pulse    frequency, peak % time, background amps,    initial amps, initial slope time, final slope time,    and final amperage control.
  • LX Model: With the Automation Interface    Connector, the integrator can quickly    interface to the output disable, weld    start/stop, gas start/stop inputs, valid arc,    pulse lock out, and end of weld sequence    outputs.


  • Welding Machine

    Webboard